Register or Log In

International Society for Industrial Process Tomography

9th World Congress on Industrial Process Tomography

TOMOCON: A Marie Skłodowska-Curie European Training Network on Tomography-based Control in Industrial Processes

U. Hampel1,2*, T. Wondrak1, M. Fjeld3, R. Mudde4, L. M. Portela4, S. Kenjeres4, D. Legendre5, G. Link6, T. Koiranen7, J. Hlava8, L. Babout9, L. Jackowska-Strumiłło9, M. Soleimani10, M. Vauhkonen11, T. Lähivaara11, T. Rymarczyk12, M. Trepte13, A. Voutilainen14, M. Rodriguez15, J. Bos16, S. Betz17, J. Hysky18, P. Pennerstorfer19, M. Goldammer20, C. Matten21, R. Hoffmann21, J.-P. Gingras22, D. van der Plas23, P. Veenstra24, J. Nurmi25, C. Pudack26, M. J. da Silva27

1 Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany

2 Technische Universität Dresden, AREVA Endowed Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany

3 Chalmers University of Technology, Department of Computer Science and Engineering, SE-412 96 Gothenburg, Sweden

4 Delft University of Technology, Department of Chemical Engineering, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands

5 Institut National Polytechnique de Toulouse, Institut de Mécanique des Fluides de Toulouse, Allée Emile Monso 6, 31029, Toulouse Cedex 4, France

6 Karlsruhe Institute of Technology, Institute for Pulsed Power and Microwave Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen

7 Lappeenranta University of Technology, Department of Chemical Engineering Processes Group, Skinnarilankatu 34, 53850 Lappeenranta, Finland

8 Technical University of Liberec, Institute of Mechatronics and Computer Engineering, Studentska 1402/2, 46117 Liberec, Czech Republic

9 Lodz University of Technology, Institute of Applied Computer Science, Stefanowskiego 18/22,
90-924 Lodz, Poland

10 University of Bath, Department of Electronic and Electrical Engineering, Claverton Down, BA2 7AY, Bath, United Kingdom

11 University of Eastern Finland, Department of Applied Physics, POB 1627, FI-70211, Kuopio, Finland

12 Netrix S.A., R&D Division, ul. Wojciechowska 31, 20-704 Lublin, Poland

13 Teletronic Rossendorf GmbH, Flow Measurement Group, Bautzner Landstrasse 45, 01454 Radeberg, Germany

14 Rocsole Ltd., Technology Center, Kauppakatu 20, FI-70100 Kuopio, Finland

15 CERG Fluides S.A.S., Hydraulic Test Center, Rue Lavoisier, 38800 Le Pont De Claix, France

16 Frames Group B.V., Separation Technologies,Raoul Wallenbergplein 29, Alphen aan den Rijn,2404ND, The Netherlands

17 Vötsch Industrietechnik GmbH, Microwave Technology, Greizer Strasse 41 – 49, 35447 Reiskirchen-Lindenstruth, Germany

18 Pinta Elements GmbH, Process Technology, Otto-Hahn-Strasse 7, 82216 Maisach, Germany

19 Primetals Technologies Austria GmbH, Technology and Innovation, Turmstrasse 44, 4031 Linz, Austria

20 Siemens AG, Non-destructive Evaluation Center, Otto-Hahn-Ring 6, 81739 Munich, Germany

21 Linde AG, Engineering Division, Dr.-Carl-von-Linde-Strasse 6-14, 82049 Pullach, Germany

22 Total S.A., R&D Deep Offshore Subsea Processing, Avenue Larribau, 64018 PAU Cedex, France

23 Tata Steel Nederland Technology B.V., Process Modelling and Fluid Dynamics, Postbus 10000, 1970 CA, IJmuiden, The Netherlands

24 Shell Global Solutions International B.V., Shell Technology Centre Amsterdam, Grasweg 31, 1031 HW, Amsterdam, The Netherlands

25 DuPont Ltd., Nutrition and Health Crystallization R&D Center, Sokeritehtaantie 20, FI-02460 Kantvik, Finland

26 Sulzer Chemtech Ltd., Fractional Crystallization, Sulzerallee 48, P.O. Box 65, 8404 Winterthur, Switzerland

27 Universidade Tecnológica Federal do Paraná, Electrical and Computer Engineering, Av. Sete de Setembro, 3165, 80230-901 Curitiba, Paraná, Brazil



The European Doctoral Training Network “Smart Tomographic Sensors for Advanced Industrial Process Control (TOMOCON)” gathers academic and industrial partners from different sectors with the mission to develop new fundamentals and technological solutions of advanced industrial control by tomographic sensors. It has received funding by the EU under the Marie Skłodowska-Curie scheme as an Innovative Training Network. It runs from September 2017 to August 2021 with 15 Early Stage Researchers, who are working as PhD students in 10 different European academic institutions. Within their research projects the doctoral students receive an extensive training in various fields of engineering and natural sciences being carried out in the frame of so called secondments at different industrial and academic partners as well as via three dedicated Summer Schools. The network is further supported by an Advisory Board with members from leading institutions in the field of process tomography.

Keywords Marie Skłodowska-Curie Innovative Training Network, Process Tomography, Process Control, Process Modelling, Doctoral Education and Training

Industrial Application General

to access the full text